When a standard move becomes a specialist project

The project

At Specialised Movers, we are always ready for a challenge. 
Recently, a long-standing client, for whom we had previously relocated laboratory equipment, approached us to survey a project involving the replacement of document storage cabinets within their office building.
 
Initially, the project appeared relatively straightforward. During a site inspection, several existing document storage cabinets had been identified as unsuitable and needed to be replaced with more secure alternatives.

The project

At Specialised Movers, we are always ready for a challenge. 
Recently, a long-standing client, for whom we had previously relocated laboratory equipment, approached us to survey a project involving the replacement of document storage cabinets within their office building.
 
Initially, the project appeared relatively straightforward. During a site inspection, several existing document storage cabinets had been identified as unsuitable and needed to be replaced with more secure alternatives.

Work involved

Upon arriving on site, our survey team assessed the cabinets that required removal. They were standard metal tambour units and, despite the staircase being somewhat restricted, there appeared to be no significant obstacles to removing them. As the saying goes within the removals industry, “if it came in, it can go out.”

However, the complexity of the project became apparent when the replacement units were introduced. Rather than standard filing cabinets, the new units were heavy-duty fireproof safes, each weighing almost a quarter of a tonne.

A detailed assessment of the building quickly revealed that the staircase would not provide sufficient space for a safe and controlled installation. Alternative solutions were explored, including the possibility of constructing a temporary lifting arrangement within the stairwell. Unfortunately, the combination of the safes’ dimensions, weight, and the restricted space available ruled this option out.

Our team then conducted a full external survey of the building. Most of the windows were sealed units and too small to provide a viable access route. However, one potential solution stood out: a window located directly above the main entrance. This opening offered the opportunity to safely lift the safes into the building from outside.
 
One of the key advantages of working with Specialised Movers is our ability to deliver complete project solutions using our in-house expertise. Following our survey, we developed a detailed proposal for the client. We initially suggested selecting the next size down in safe capacity, which would have allowed the units to be moved internally via the staircase. However, the client was committed to the larger safes and required an alternative solution.
 
With the preferred specification confirmed, our team set about planning the installation.
 
The first stage involved designing a bespoke scaffold structure, which was completed by our in-house specialists. This was followed by the preparation of a comprehensive lift plan, risk assessment, and method statement. Once these documents had been reviewed and approved by the client, a date was agreed for the installation.
 
The day before the lift, the Specialised Movers Scaffolding Team arrived on site to erect the scaffold. Working alongside our in-house window specialists, the team carefully removed the windows above the main entrance and securely protected the opening in preparation for the lift.
 
The fireproof safes were delivered to our premises during the week prior to the installation and loaded onto one of our 17-tonne removal vehicles ready for transport to site. On the day of the project, the temporary boarding was removed and a HIAB crane was positioned and set up for the lift operation.
 
To fit through the window opening, the safes first had to be carefully laid on their sides. Once positioned correctly, they were securely slung and a test lift was carried out to confirm that the load was balanced and stable.
 
Each safe was then lifted through the window opening and placed onto machinery skates, allowing our team to transport them safely through the office environment. Once in the designated location, the safes were carefully returned to their upright position and manoeuvred into their final positions.
 
What initially appeared to be a routine cabinet replacement evolved into a complex specialist lifting operation. Through detailed planning, innovative problem-solving, and the combined expertise of our in-house teams, the project was completed safely, efficiently, and with minimal disruption to the client.
 
At Specialised Movers, no two projects are ever the same. Challenges like this demonstrate the value of specialist knowledge, careful preparation, and having the right people and equipment to deliver solutions when conventional methods simply are not enough.

Work involved

Upon arriving on site, our survey team assessed the cabinets that required removal. They were standard metal tambour units and, despite the staircase being somewhat restricted, there appeared to be no significant obstacles to removing them. As the saying goes within the removals industry, “if it came in, it can go out.”

However, the complexity of the project became apparent when the replacement units were introduced. Rather than standard filing cabinets, the new units were heavy-duty fireproof safes, each weighing almost a quarter of a tonne.

A detailed assessment of the building quickly revealed that the staircase would not provide sufficient space for a safe and controlled installation. Alternative solutions were explored, including the possibility of constructing a temporary lifting arrangement within the stairwell. Unfortunately, the combination of the safes’ dimensions, weight, and the restricted space available ruled this option out.

Our team then conducted a full external survey of the building. Most of the windows were sealed units and too small to provide a viable access route. However, one potential solution stood out: a window located directly above the main entrance. This opening offered the opportunity to safely lift the safes into the building from outside.
 
One of the key advantages of working with Specialised Movers is our ability to deliver complete project solutions using our in-house expertise. Following our survey, we developed a detailed proposal for the client. We initially suggested selecting the next size down in safe capacity, which would have allowed the units to be moved internally via the staircase. However, the client was committed to the larger safes and required an alternative solution.

With the preferred specification confirmed, our team set about planning the installation.

The first stage involved designing a bespoke scaffold structure, which was completed by our in-house specialists. This was followed by the preparation of a comprehensive lift plan, risk assessment, and method statement. Once these documents had been reviewed and approved by the client, a date was agreed for the installation.

The day before the lift, the Specialised Movers Scaffolding Team arrived on site to erect the scaffold. Working alongside our in-house window specialists, the team carefully removed the windows above the main entrance and securely protected the opening in preparation for the lift.

The fireproof safes were delivered to our premises during the week prior to the installation and loaded onto one of our 17-tonne removal vehicles ready for transport to site. On the day of the project, the temporary boarding was removed and a HIAB crane was positioned and set up for the lift operation.

To fit through the window opening, the safes first had to be carefully laid on their sides. Once positioned correctly, they were securely slung and a test lift was carried out to confirm that the load was balanced and stable.

Each safe was then lifted through the window opening and placed onto machinery skates, allowing our team to transport them safely through the office environment. Once in the designated location, the safes were carefully returned to their upright position and manoeuvred into their final positions.

What initially appeared to be a routine cabinet replacement evolved into a complex specialist lifting operation. Through detailed planning, innovative problem-solving, and the combined expertise of our in-house teams, the project was completed safely, efficiently, and with minimal disruption to the client.

At Specialised Movers, no two projects are ever the same. Challenges like this demonstrate the value of specialist knowledge, careful preparation, and having the right people and equipment to deliver solutions when conventional methods simply are not enough.

Get in touch with us today, please call one of our team
on 0114 261 1183 or email services@specialisedmovers.com

Other case studies

Other case studies

Specialised Movers
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.